氫氧化鉀進行加工的時候使用不同的方法來進行制作的，在眾多的方法當中使用間歇處理法加工出來的產品純度是比較高的，那么氫氧化鉀進行加工時使用間歇處理法如何？

　　Potassium hydroxide processing when using different methods to make, in many methods using intermittent processing method out of the product purity is relatively high, then potassium hydroxide processing using intermittent processing method?

　　一般再進行加工的時候是需要使用間歇法鍋式蒸煮的工藝來生產出來呈現熔融狀態的堿性物質。之后再將生產出來的熔融狀態的堿輸送到高位槽當中，可以在高位槽底部的位置使用一些燒煤等燃燒起來進行保溫工作，于高位槽當中輸送氫氧化鉀的數量需要使用溢流裝置等進行控制。

　　The general process of reprocessing is the use of intermittent pot cooking process to produce a molten alkaline material. After the production of molten state of alkali transport to the high tank, you can use some coal burning at the bottom of the high tank to burn up the heat preservation work, as for the high tank in the delivery of potassium hydroxide number need to use overflow device control.

　　之后再將堿液從高位槽當中輸送到弧形堿槽，在輸送的過程當中需要控制好輸送的流量。對堿液進行蒸發處理之后的熔融堿在經過成品分離器之后進入到弧形槽。之后在進入到制冷滾筒表面當中的燕尾槽，一般滾筒的下面需要浸泡到弧形堿槽當中的深度要注意。

　　Then the lye is transported from the high tank to the arc alkaline tank, and the flow rate of conveying needs to be controlled in the process of conveying. The molten alkali after evaporation treatment enters the arc tank after passing through the finished product separator. After entering into the dovetail trough in the surface of the refrigeration drum, the depth of the general drum needs to be soaked into the arc alkali trough.

　　然后滾筒在以一個比較緩慢的速度進行轉動，制冷水就會從軸承的一邊慢慢的進入到軸承的中間，然后噴淋到滾筒的內表面對其進行冷卻處理，這樣就可以確保滾筒擁有良好的換熱性能。之后隨著滾筒的轉動就會慢慢的被刮刀刮下來獲得成品。

　　Then the roller rotates at a relatively slow speed, and the cooling water will slowly enter the middle of the bearing from one side, and then spray onto the inner surface of the roller for cooling treatment, so that you can ensure that the roller has good heat transfer performance. Then with the rotation of the drum will be slowly scraped down to obtain the finished product.

　　氫氧化鉀進行加工時使用間歇處理法如何？以上便是相關步驟了，當然在其中可能會因?yàn)椴僮鞑划?dāng)出現問題，這就需要操作人提前做好預防工作了，更多內容就來網站www.tjxjw.com咨詢吧。

　　How about using batch treatment method when potassium hydroxide is processed? The above is the relevant steps, of course, in which there may be problems due to improper operation, which requires the operator to do a good job of prevention in advance, more content to the website www.tjxjw.com consultation.