1. We first need to pour alkaline substances into water, and then stir them into an alkaline solution. There is no solid. In this process, we must pay attention to avoid getting potassium hydroxide on the skin, because alkaline substances have a strong corrosive effect on our human skin.

2、等到堿溶液的溫度在降到了和室內溫度差不多的時候，可以往當中添加進去廢油差不多再持續的攪拌3~5分鐘。

2. When the temperature of the alkali solution is about the same as the indoor temperature, the waste oil can be added and stirred for 3 ~ 5 minutes.

3、接下來需要倒入到模具中即可，在選擇模具的時候一定要選擇合適材料的，差不多3-5的時間即可凝固不過像是我們自己制作的，需要等到在凝結之后再風干半個月的時候才可以進行使用。

3. Next, you need to pour it into the mold. When selecting the mold, you must select the appropriate material. It can solidify in about 3-5 times. However, it is made by ourselves. It can be used only when it is air dried for half a month after solidification.

4、在制作的過程當中如果想要添加一些有顏色、香味等，也是可以根據相應的配方往當中添加色素或者是香精。

4, in the process of production, if you want to add some colors and fragrances, you can add pigment or essence according to the corresponding formula.

5、不過在添加一下物質的時候一定要注意控制好各種的計量，尤其是往當中添加的堿性物質劑量是一定要控制好的。

5. However, when adding substances, we must pay attention to controlling the measurement of various substances, especially the dose of alkaline substances added to them.

今天的分享就是關于氫氧化鉀，更多的內容小編會不斷的再此分享，更多的內容請繼續關注我們：http://www.tjxjw.com

Today's sharing is about potassium hydroxide. More content will be shared here. Please continue to pay attention to us: http://www.tjxjw.com